The Worlds most popular SWR/RF analyzer just got incredibly better and gives you more value than ever!

The new MFJ-259C has all the features of the MFJ-259B Plus expanded frequency coverage.

The MFJ-259C now covers 530 KHz to 230 MHz compared to 1.8 to 170 MHz for the MFJ-259B

• MFJ-259C gives you a complete pictures of your antennas performance.

• You can read antenna SWR and Complex Impedance 530 KHz to 230MHz

• Read Complex Impedance as series resistance and reactance (R+jX) or as magnitude (Z) and phase (degrees).

• You can determine velocity factor, coax cable loss in dB, length of coax and distance to a short or open in feet.

• You can read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance.

• Also read inductance in UH and capacitance in pF at RF frequencies.

• Large easy-to-read two line LCD screen and side-by-side meters clearly display your information.

• Built-in frequency counter, Ni-Cad charger circuit, battery saver, low battery warning and smooth reduction drive tuning and much more.

Super easy to use! Just set the bandswitch and tune the dial -- just like you transceiver. SWR and Complex Impedance are displayed instantly!

Here's what you can do

• Find your antennas true resonant frequency.

• Trim dipoles and verticals.

• Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly.

• You'll know exactly what to do by simply watching the display.

• Perfectly tune critical HF mobile antennas in seconds for super DX -- without subjecting your transceiver to high SWR.

• Measure your antennas 2:1 SWR bandwidth on one band, or analyze multiband performance from 530 KHz to 230 Mhz!

• Check SWR outside the ham bands without violating FCC rules.

• Take the guesswork out of building and adjusting matching networks and baluns.

• Measure distance in feet to a short or open in faulty coax.

• Measure length of a roll of coax, coax loss, velocity factor, impedance.

• Measure inductance and capacitance.

• Measure resonant frequency and approximate Q of traps, stubs, transmission lines, RF chokes, tuned circuits and baluns.

• Adjust your antenna tuner for a perfect 1:1 match without creating QRM.

And this is only the beginning! the MFJ-259C is a complete ham radio test station including -- frequency counter, RF signal generator, SWR Analyzer, RF resistance and Reactance Analyzer, Coax Analyzer, Capacitance and Inductance Meter and more!

Take it Anywhere!

• Fully portable, take it anywhere -- remote sites, up towers, on DX-peditions.

• Use 10AA or Ni-Cad batteries (not included) or 110VAC with MFJ-1312D, (also not included). I have these in stock if you need one and will ship it free if purchased at the same time as the MFJ-259C
   

• Rugged all metal cabinet is only 4x2x6 3/4 Inches.